| 230.20.0800.503 Type 21/950. Standard 5 Slewing Ring Bearings | Bore Type:Tapered Bore; Dynamic Load Rating:3,900,000 N; Limiting Speed - Oil:900 rpm; Groove Width A:26 mm; Enclosure:Open; Axial Load Factor Y2:4.19; Nr. of Holes:8; Axial Load Factor Y1:2.81; Limiting Speed - Grease:720 rpm; Da (max):578 mm; Fillet Radius/Chamfer:5 mm; Roller Profile:Symmetric; D:600 mm; Retainer Material:Machined Brass; Weight:151.000 kg; Static Load Rating:5,500,000 N; Axial Load Factor Y0:2.75; |
| 162.20.0630.890.11.1503 Standard 5 Slewing Ring Bearings | Dimension D:8.0 in; Cor - Static Load Rating:28551 lbf; Dimension P:0.8 in; Dimension T:11.0 in; Bearing Type:Split Cylindrical Re; Dimension W:1.2 in; Dimension S:1.5 in; Maximum Speed:4350 rpm; Series Type:Medium Series; Shaft Size:1.75 in; Bearing Number:MSE112BR; Seal Type:Kevlar Packing Seal; Dimension B:5.0 in; Tensioning Unit Type:Tension Type; Cr - Dynamic Load Rating:27202 lbf; Bearing UPC:013992031686; |
| 162.16.0560.890.11.1503 Standard 5 Slewing Ring Bearings | Radial Clearance:0.040 to 0.075 mm; db (min):82 mm; Fillet Radius/Chamfer:2.1 mm; Limiting Speed - Oil:4,500 rpm; Configuration:Single Row; dc (min):92 mm; Da (max):138 mm; d:70 mm; Limiting Speed - Grease:3,600 rpm; Enclosure:Open; ra (max):2 mm; Static Load Rating:325,000 N; D:150 mm; Inside Ring Outside Diameter:89 mm; Bore Type:Cylindrical Bore; r1:2.1 mm; db (max):87 mm; dd (min):100 mm; Dynamic Load Rating:274,000 N; |
| 3R6-63P9 Rotek Slewing Ring Bearings | Cage Type:Stamped Steel; d:10.5 in; da - Cone Frontface Backing Diameter:11.06 in; Cup Part Number:LM451310V; Bearing Weight:64 lb; r - Cup Backface To Clear Radius2:0.130 in; C - Cup Width:1.7500 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:71200 lbf; D:14 in; Ab - Cage-Cone Frontface Clearance:0.15 in; Cg - Geometry Factor11:0.154; K - Factor7:1.62; Design Units:Imperial; |
| 62.25.1077.308.11.1504 Standard 5 Slewing Ring Bearings | r1:1.1 mm; db (max):45 mm; d:35 mm; Radial Clearance:0.025 to 0.050 mm; ra1 (max):1 mm; Limiting Speed - Grease:7,200 rpm; ra (max):1.5 mm; Fillet Radius/Chamfer:1.5 mm; D:80 mm; Bore Type:Cylindrical Bore; dc (min):48 mm; Dynamic Load Rating:60,500 N; Static Load Rating:60,000 N; Limiting Speed - Oil:8,600 rpm; B:31 mm; db (min):42 mm; dd (min):53 mm; Da (max):71.5 mm; Configuration:Single Row; Weight:0.696 kg; |
| 231.21.0875.013 Type 21/950.1 Standard 5 Slewing Ring Bearings | Clearance:C0 (Normal); Cr - Dynamic Load Rating:5.1 kN; Grease Reference Speed:23000 rpm; Bore Size d:12 mm; Weight:0.02 Kg; Radius Rs min:0.300 mm; C0r - Static Load Rating:2.4 kN; Outside Ring Width B:8.000 mm; Outside Diameter D:28.0000 mm; Oil Reference Speed:33000 rpm; Features:One Contact Seal; |
| 161.16.0400.891.21.1503 Standard 5 Slewing Ring Bearings | Fillet Radius/Chamfer:1 mm; Dynamic Load Rating:400,000 N; Configuration:Double Row; c:3 mm; Static Load Rating:750,000 N; Enclosure:Double Seal; f (max):3.1 mm; C1:65.1 mm; C:79 mm; D:180 mm; Limiting Speed - Oil:850 rpm; B:80 mm; d:120 mm; Weight:6.950 kg; Bore Type:Cylindrical Bore; E:196 mm; |
| 281.30.0900.013 Type 110/1100.1 Standard 5 Slewing Ring Bearings | Dimension RV:0.19 in; Eng Internal Radial Clearance - Min:0.0071; Grease Lubrication - M/N Seal:650 rpm; C0 - Static Load:237000 lb; Dimension E:7.000 in; Float:0.083 in; Dimension BC:14.00 in; Dimension F:9.5 in; Dimension H:1.50 in; Y1 - Geometry Factor:2.67; e - Geometry Factor:0.25; Oil Lubrication - B/C/O Seal:350 rpm; Pre Install Clearance Min:0.160 mm; Locking Style:Single V-Lock; Dimension SV:3.29 in; |
| 61.25.0764.106.21.1504 Standard 5 Slewing Ring Bearings | Major Dia - B:5.622 in; A:5.131 in; L:3.071 in; d:4.528 in; Taper:1:12; Weight:5.00 lb; G:0.472 in; F:0.115 in; Threads No. per Inch:12; |
| 231.20.0800.013 Type 21/950.1 Standard 5 Slewing Ring Bearings | r - Cup Backface To Clear Radius1:0.030 in; Y - ISO Factor3:1.21; C - Cup Width:1.0000 in; Db - Cup Backface Backing Diameter:6.50 in; e - ISO Factor2:0.5; Series:68000; Cup Part Number:68709; Design Units:Imperial; Cg - Geometry Factor:0.103; D:7.0856 in; Da - Cup Frontface Backing Diameter:6.81 in; |
| 61.25.0980.891.21.1503 Standard 5 Slewing Ring Bearings | Note:This product line wa; Dimension L:27.0 in; Seal Type:Kevlar Packing Seal; Dimension H1:1.7 in; Bearing Type:Split Cylindrical Ex; Housing Width:7.4 in; Weight:547 lb; Support Type:Four-Bolt Plummer Bl; Shaft Size:240 mm; Series Type:Light Series; Cor - Static Load Rating:289779 lbf; Bolt Size:4 x M30; Dimension J:19.8 in; Maximum Speed:820 rpm; Bearing UPC:013992029270; Dimension K:5.5 in; Dimension H2:23.0 in; |
| A22-166N1 Rotek Slewing Ring Bearings | Bearing - Housing - Seal UPC:013992090058; Cor - Static Load Rating:110381 lbf; Maximum Speed:2130 rpm; Seal Type:Kevlar Packing Seal; Support Type:Take-Up; Bearing UPC:013992032270; Dimension Y:0.7 in; Note:This product line wa; Dimension P:0.9 in; Dimension B:8.5 in; Dimension U:0.2 in; Ca - Axial Load Rating:5620 lbf; Series Type:Medium Series; Bearing - Housing - Seal:MSE312BRHKPS; Dimension S:2.8 in; |
| 60.25.0955.500.11.1503 Standard 5 Slewing Ring Bearings | Ab - Cage-Cone Frontface Clearance:1.8 mm; Y - ISO Factor9:1.57; Cage Type:Stamped Steel; e - ISO Factor8:0.38; C0 - Static Radial Rating:13900 lbf; R - Cone Backface To Clear Radius1:1.520 mm; Design Units:Imperial; C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; a - Effective Center Location3:-4.3 mm; Bearing Weight:0.30 Kg; Da - Cup Frontface Backing Diameter:63.00 mm; Cg - Geometry Factor:0.0668; |
| 161.25.0886.890.11.1503 Standard 5 Slewing Ring Bearings | J1:70 mm; UPC Code:999999999; Bolt Qty:4; A1:120 mm; Material :Cast Iron; Max Oil Speed:2100; J:350.00 mm; H2:45.0 mm; Lockwasher:MB24; Cage Type:EJ; N:18 mm; N1:24.00 mm; Max Grease Speed:1800; C0 Static Load Rating:1040; A3:260 mm; H1:140.0 mm; C1 Dynamic Load Rating:824; Shaft Diameter d:110 mm; A:185.00 mm; Adapter Sleeve1:H2324; |
| 12.18.0748.002.21.1504 Standard 5 Slewing Ring Bearings | Sleeve:SK-11023; Locknut:AN-20; Bearing Number:22322K; Series:223K; Removal Nut O.D. C:160.32 mm; Tolerance1:-0.10 mm; Major Diameter:119.94 mm; Lockwasher and Lockplates:W-20; L2:98.00 mm; Removal Nut:ARN-22; a:4.00 mm; Diameter d:100 mm; Sleeve Weight:4.25 lb; Taper:1:12; |
| 92.25.1154.990.11.1503 Standard 5 Slewing Ring Bearings | Ca90 - Dynamic Thrust Rating (90 million revolutions)6:95900 N; Series:32319; B - Cone Width:67 mm; C0 - Static Radial Rating:714000 N; Cg - Geometry Factor:0.101; r - Cup Backface To Clear Radius2:3 mm; D:200 mm; C - Cup Width:55 mm; Bearing Weight:9.74 Kg; Cage Type:Stamped Steel; Design Units:METRIC; Da - Cup Frontface Backing Diameter:185.9 mm; Db - Cup Backface Backing Diameter:180.1 mm; d:95 mm; |
| No. | Brand | J | a | e | N | C | c | B | H |
| 230.21.0675.013 Type 21/750. | Standard 5 | - | - | - | - | - | - | - | - |
| 61.20.0710.101.21.1503 | Standard 5 | - | - | - | - | - | - | 40 mm | - |
| 231.20.1000.503 Type 21/1200.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 250.15.0475.013 Type 13/5 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R13-122N1B | Rotek | - | - | - | - | - | - | 6 mm | - |
| 60.22.0575.502.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.25.1077.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.25.0886.890.11.1503 | Standard 5 | 350.00 mm | - | - | 18 mm | - | - | - | - |
| 61.25.0855.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.20.1006.990.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 280.30.1075.013 Type 110/1200. | Standard 5 | - | - | - | - | - | - | - | - |
| 162.20.0630.891.21.1503 | Standard 5 | - | - | - | - | - | - | 45 mm | - |
| 62.20.0844.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.20.0900.013 Type 21/1050.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.25.0955.575.11.1403 | Standard 5 | - | - | - | - | - | - | 296 mm | - |
| 230.21.0975.013 Type 21/1050. | Standard 5 | - | - | - | - | - | - | - | - |
| 11.20.0755.001.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 281.30.1100.013 Type 110/1300.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 280.30.1175.013 Type 110/1300. | Standard 5 | - | - | 9.0 mm | - | - | - | - | - |
| 232.20.0600.503 Type 21/750.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.25.0955.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.21.0875.013 Type 21/950.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0644.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 282.30.1175.013 Type 110/1300.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.20.0500.503 Type 21/650.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.1094.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 230.20.0400.503 Type 21/520. | Standard 5 | - | - | - | - | - | - | 7 mm | - |
| 62.25.0955.500.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |