| 232.21.0475.013 Type 21/520.2 Standard 5 Slewing Ring Bearings | Housing Width A:17.5 in; Total Height H:104.8 mm; Socket Width A2:44.4 mm; Center of Bearing from End S:9.5 mm; Opening Width N1:15.9 mm; Seal Type:Molded Shroud; Housing Style:Take-Up; Slot Width A1:17.5 mm; Dynamic Load Rating:6400 lbf; Static Load Rating:3440 lbf; Series:Standard; Height H2:63.5 mm; Dimension L2:12.70 mm; Opening Height N2:36.5 mm; Shaft Length L1:74.6 mm; Inside Ring Width B:25.4 mm; |
| 62.20.1094.500.01.1503 Standard 5 Slewing Ring Bearings | e - Geometry Factor:0.22; Oil Lubrication - M/N Seal:1500 rpm; Y2 - Geometry Factor:4.67; Float:0.083 in; Grease Lubrication - M/N Seal:1500 rpm; Grease Lubrication - B/C/O Seal:1150 rpm; UPC Code:0883450374620; Dimension RVV:0.60 in; Engineering Group:Mounted Bearing; Oil Lubrication - T Seal:2650 rpm; Dimension C:4.19 in; Dimension SVV:4.18 in; Shaft Tolerance:0.0020 in; Dimension J (Bolt Size):0.875 in; |
| 11.20.0971.000.11.1504 Standard 5 Slewing Ring Bearings | Cage Type:Pin-Type; C90 - Dynamic Radial Rating (90 million revolutions)4:90100 lbf; Y - ISO Factor9:1.8; B:82.550 mm; Bearing Weight:44.400 Kg; D:431.724 mm; Cg - Geometry Factor:0.15; G2 - Heat Generation Factor (Rib-Roller End):152.3; Aa - Cage-Cone Backface Clearance:8.9 mm; d:260.350 mm; Cup Part Number:HM252315; db - Cone Backface Backing Diameter:292.10 mm; Series:HM252300; K - Factor7:1.76; |
| 161.20.0630.890.11.1503 Standard 5 Slewing Ring Bearings | Da - Cup Frontface Backing Diameter:42.93 mm; e - ISO Factor8:0.36; Y - ISO Factor9:1.68; C1 - Dynamic Radial Rating (1 million revolutions)5:6010 lbf; Cone Part Number:05070XS; a - Effective Center Location3:-4.1 mm; da - Cone Frontface Backing Diameter:22.61 mm; Db - Cup Backface Backing Diameter:40.39 mm; G1 - Heat Generation Factor (Roller-Raceway):5.8; G2 - Heat Generation Factor (Rib-Roller End):5.55; |
| 60.35.0680.000.11.1503 Standard 5 Slewing Ring Bearings | C:185.0 mm; Threads B:M115x2; A:6 mm; Assembly Weight:5.100 Kg; D:38.00 mm; E1:116 mm; Piston Length of Travel:5 mm; E:154 mm; Piston Area:5900 mm²; |
| 231.20.0400.013 Type 21/520.1 Standard 5 Slewing Ring Bearings | Y1 - Geometry Factor:3.07; Dimension D Min:9.50 in; Bearing Number:22217; Grease Lubrication - B/C/O Seal:1100 rpm; Grease Lubrication - M/N Seal:1400 rpm; Dimension SVV:4.18 in; Weight:33 lb; Dimension L:3.59 in; Oil Lubrication - T Seal:2400 rpm; Dimension RVV:0.59 in; Pre Install Clearance Min:0.0037 in; Oil Lubrication - B/C/O Seal:1100 rpm; UPC Code:0883450146715; Engineering Group:Mounted Bearing; |
| 230.20.1000.503 Type 21/1200. Standard 5 Slewing Ring Bearings | C1 - Cup Flange Width:0.4375 in; D1 - Flange Outer Diameter:8.8085 in; Da - Cup Frontface Backing Diameter:7.87 in; Y - ISO Factor4:1.84; e - ISO Factor3:0.33; Cg - Geometry Factor5:0.115; C - Cup Width:2.1250 in; K - Factor2:1.79; r - Cup Backface To Clear Radius1:0.130 in; Series:935; Cup Part Number:932-B; Design Units:Imperial; D:8.3750 in; |
| 12.20.0895.001.21.1504 Standard 5 Slewing Ring Bearings | R - Inner Ring To Clear Radius1:4.000 mm; d:380.000 mm; UPC Code:087796240056; Design Unit:METRIC; Y1 - ISO Factor5:2.79; da - Inner Ring Backing Diameter:427.000 mm; Bearing Weight:291.000 Kg; Y2 - ISO Factor6:1.83; Reference Thermal Speed Rating (Oil)7:320; Cage Material:Brass; Bore Taper:1/30; C1(2) - Dynamic Radial Rating (Two-Rows):5580000 N; D:620.000 mm; r - Outer Ring To Clear Radius2:4.000 mm; |
| 3R8-122N1A Rotek Slewing Ring Bearings | Bearing - Housing - Seal:LSE511BRHRSS; Seal Type:Viton Single Lip; Bearing Number:LSE511BR; Cr - Dynamic Load Rating:103187 lbf; Weight:216 lb; Dimension H2:16.3 in; Bolt Size:4 x M24; Housing Width:6.8 in; Note:This product line wa; Shaft Size:5-11/16 in; Dimension L:22.0 in; Bearing Type:Split Cylindrical Re; Cor - Static Load Rating:149273 lbf; Dimension H1:1.6 in; Series Type:Light Series; Pillow/Plummer Block Style:Split Cylindrical Ho; |
| 62.20.1094.575.01.1403 Standard 5 Slewing Ring Bearings | Limiting Speed (Grease):30100 rpm; Design Units:METRIC; Cage Type:CR - Phenolic Outer; Bearing Weight:0.195 Kg; D:62 mm; R - Inner Ring To Clear Radius2:1.0 mm; Limiting Speed (Oil):60200 rpm; Ball Type:Ceramic; Da - Outer Ring Backing Diameter:56.0 mm; d:30 mm; r - Outer Ring To Clear Radius3:1.0 mm; da - Inner Ring Backing Diameter:36.500 mm; Ce - Dynamic Radial Rating1:25500 N; Contact Angle:15 º; |
| 60.22.0505.000.11.1503 Standard 5 Slewing Ring Bearings | K - Factor7:1.4; db - Cone Backface Backing Diameter:39.62 mm; Cg - Geometry Factor:0.0681; Bearing Weight:0.4 Kg; Design Units:Imperial; Y - ISO Factor9:1.44; Aa - Cage-Cone Backface Clearance:0.8 mm; Series:02400; C - Cup Width:16.238 mm; R - Cone Backface To Clear Radius1:0.760 mm; Ab - Cage-Cone Frontface Clearance:1.5 mm; G1 - Heat Generation Factor (Roller-Raceway):17.5; B:21.001 mm; e - ISO Factor8:0.42; |
| 62.25.0955.500.11.1503 Standard 5 Slewing Ring Bearings | da - Inner Ring Backing Diameter:97.000 mm; Cg - Geometry Factor8:0.0614; Cage Material:Brass; Bearing Weight:5.4 Kg; D:159.993 mm; Da - Outer Ring Backing Diameter:144.000 mm; Cage Type:EM; Y2 - ISO Factor6:2; d:75 mm; Reference Thermal Speed Rating (Oil)7:4000; Y1 - ISO Factor5:3.04; Design Unit:METRIC; B - Outer Ring Width:55.000 mm; C0 - Static Radial Rating:478000 N; Reference Thermal Speed Rating (Grease):3400; |
| 12.18.0748.002.21.1504 Standard 5 Slewing Ring Bearings | Sleeve:SK-11023; Locknut:AN-20; Bearing Number:22322K; Series:223K; Removal Nut O.D. C:160.32 mm; Tolerance1:-0.10 mm; Major Diameter:119.94 mm; Lockwasher and Lockplates:W-20; L2:98.00 mm; Removal Nut:ARN-22; a:4.00 mm; Diameter d:100 mm; Sleeve Weight:4.25 lb; Taper:1:12; |
| 61.20.0544.575.01.1403 Standard 5 Slewing Ring Bearings | C1 - Dynamic Radial Rating (1 million revolutions)6:8390 lbf; da - Cone Frontface Backing Diameter:2.17 in; Series:LL205400; d:2 in; Ab - Cage-Cone Frontface Clearance:0.09 in; G2 - Heat Generation Factor (Rib-Roller End):29.1; Aa - Cage-Cone Backface Clearance:0 in; K - Factor8:1.74; Design Units:Imperial; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:1250 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:3790 lbf; |
| 62.25.1077.890.11.1503 Standard 5 Slewing Ring Bearings | Da - Cup Frontface Backing Diameter:232.16 mm; Cone Part Number:JM734449A; B - Cone Width:44.500 mm; e - ISO Factor8:0.44; C90 - Dynamic Radial Rating (90 million revolutions)4:99300 N; K - Factor7:1.34; Cup Part Number:JM734411; Cage Type:Stamped Steel; da - Cone Frontface Backing Diameter:180.09 mm; B:51 mm; Cg - Geometry Factor:0.115; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:74300 N; |
| 61.20.0560.100.11.1503 Standard 5 Slewing Ring Bearings | Bearing Type:Split Cylindrical Ex; Dimension T:18.5 in; Dimension N:13.625 in; Dimension H:4.5 in; Bearing Number:LSE515BX; Bearing UPC:013992027375; Cor - Static Load Rating:149273 lbf; Bearing - Housing - Seal:LSE515BXHHTPS; Maximum Speed:1450 rpm; Bearing - Housing - Seal UPC:013992099631; Note:This product line wa; Dimension P:1.0 in; Support Type:Round Flange; Shaft Size:5-15/16 in; Series Type:Light Series; |
| No. | Brand | J | a | e | N | C | c | B | H |
| 232.21.1075.013 Type 21/1200.2 | Standard 5 | - | - | - | - | - | - | - | - |
| A22-166N1 | Rotek | - | - | - | - | - | - | - | - |
| 61.20.0544.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.20.0400.013 Type 21/520.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0544.500.01.1503 | Standard 5 | - | - | - | - | - | - | 19.000 mm | - |
| 62.30.1120.001.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 230.20.0700.503 Type 21/850. | Standard 5 | - | - | - | - | 1125.0 mm | - | - | - |
| 231.20.0700.503 Type 21/850.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0744.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0710.001.21.1503 | Standard 5 | - | - | - | - | - | - | 77.790 mm | - |
| 282.30.1100.013 Type 110/1300.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.25.1055.500.11.1503 | Standard 5 | - | - | - | - | - | - | 33 mm | - |
| 232.21.0575.013 Type 21/650.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R13-122N1B | Rotek | - | - | - | - | - | - | 6 mm | - |
| 230.20.0800.503 Type 21/950. | Standard 5 | - | - | - | - | - | - | - | - |
| 161.25.1120.891.21.1503 | Standard 5 | - | - | - | - | - | - | 38 mm | - |
| 232.20.0700.503 Type 21/850.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 230.20.0800.013 Type 21/950. | Standard 5 | - | - | - | - | - | - | - | - |
| 91.20.1006.990.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 281.30.0900.013 Type 110/1100.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.16.0630.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 230.21.0875.013 Type 21/950. | Standard 5 | - | - | - | - | - | - | - | - |
| 3R6-63P9 | Rotek | - | - | - | - | - | - | - | - |
| 62.20.0844.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0744.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |