| 162.16.0630.891.21.1503 Standard 5 Slewing Ring Bearings | Axial Load Factor Y0:1.80; Roller Profile:Symmetric; Enclosure:Open; Limiting Speed - Oil:900 rpm; d:300 mm; Axial Load Factor Y2:2.73; Da (max):518 mm; B:192 mm; Bore Type:Cylindrical Bore; Configuration:Double Row; Limiting Speed - Grease:720 rpm; Groove Width A:32 mm; Radial Clearance:0.280 to 0.370 mm; Nr. of Holes:8; Axial Load Factor Y1:1.84; Fillet Radius/Chamfer:5 mm; D:540 mm; Static Load Rating:6,250,000 N; |
| 280.30.1175.013 Type 110/1300. Standard 5 Slewing Ring Bearings | b:52 mm; e:9.0 mm; t:15 mm; d1:460.00 mm; Appropriate Withdrawal Nut No.:HM31/500; L1:364.00 mm; Appropriate Hydraulic Nut:HMV100; Ro:G1/4; Weight:73.40 Kg; Thread D12:Tr500x5; |
| 61.20.0400.101.21.1503 Standard 5 Slewing Ring Bearings | Seal Type:Taconite; C1 Dynamic Load Rating:225; Max Oil Speed:5100; H1:80.0 mm; G:M12; H:156.00 mm; UPC Code:999999999; End Cover1:EC515-612; Shaft Diameter db:70 mm; L:280.00 mm; Locating Rings (width x OD):SR130X12.5; Cage Type:EJ; N1:20.00 mm; N:15 mm; C0 Static Load Rating:219; Material :Cast Iron; J2:257 mm; Bearing:21312; H2:30 mm; A3:175 mm; |
| 61.20.0944.575.01.1403 Standard 5 Slewing Ring Bearings | C0r - Static Load Rating:0.52 kN; Grease Limiting Speed:46000 rpm; Outside Ring Width B:5.000 mm; Features:Non-Contact Seals; Oil Limiting Speed:54000 rpm; Outside Diameter D:15.000 mm; Cr - Dynamic Load Rating:1.3 kN; Weight:0.0040 Kg; Bore Size d:6 mm; Radius Rs min:0.200 mm; |
| 60.45.0805.001.11.1504 Standard 5 Slewing Ring Bearings | C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:38000 lbf; Series:355; K - Factor8:1.91; d:1.7500 in; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.09 in; R - Cone Backface To Clear Radius3:0.14 in; G1 - Heat Generation Factor (Roller-Raceway):30; C1 - Dynamic Radial Rating (1 million revolutions)6:21800 lbf; Cg - Geometry Factor:0.0732; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9840 lbf; |
| 62.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings | B - Cone Width:17.000 mm; K - Factor7:1.4; Aa - Cage-Cone Backface Clearance:0 mm; G2 - Heat Generation Factor (Rib-Roller End):13.6; db - Cone Backface Backing Diameter:44.45 mm; C0 - Static Radial Rating:55000 N; a - Effective Center Location3:-2.3 mm; G1 - Heat Generation Factor (Roller-Raceway):18.4; C1 - Dynamic Radial Rating (1 million revolutions)5:51000 N; d:38.000 mm; da - Cone Frontface Backing Diameter:42.42 mm; |
| 232.20.1000.013 Type 21/1200.2 Standard 5 Slewing Ring Bearings | r - Cup Backface To Clear Radius2:0.76 mm; Da - Cup Frontface Backing Diameter:71.10 mm; da - Cone Frontface Backing Diameter:48.01 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:4360 lbf; Cone Part Number:LM501349; d:41.275 mm; B:21.430 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2980 lbf; R - Cone Backface To Clear Radius1:3.560 mm; |
| 61.20.0400.100.11.1503 Standard 5 Slewing Ring Bearings | Bolt Size:8 x M42; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension H1:3.6 in; Bearing Number:HSE1500BR; Bearing - Housing - Seal:HSE1500BRHRSS; Cor - Static Load Rating:1177550 lbf; Housing Width:15.7 in; Dimension H:22.008 in; Dimension J1:40.8 in; Bearing UPC:013992054289; Shaft Size:15 in; Note:This product line wa; Series Type:Heavy Series; Maximum Speed:420 rpm; Dimension L:50.0 in; |
| 62.20.0544.575.01.1403 Standard 5 Slewing Ring Bearings | r - Cup Backface To Clear Radius1:0.06 in; e - ISO Factor2:0.83; Design Units:Imperial; C - Cup Width:0.6563 in; Db - Cup Backface Backing Diameter:3.07 in; Y - ISO Factor3:0.72; Da - Cup Frontface Backing Diameter:3.50 in; Series:M903300; Cg - Geometry Factor:0.0948; Cup Part Number:M903310; D:3.6250 in; |
| 60.20.0844.500.01.1503 Standard 5 Slewing Ring Bearings | Dimension H:5.5 in; Bearing Number:LSM115BX; Dimension L:6.1 in; Bearing UPC:013992028051; Support Type:Hanger Block; Cor - Static Load Rating:95993 lbf; Seal Type1:High Temperature Pac; Note:This product line wa; Dimension Y:3.0 in; Shaft Size:115 mm; Maximum Speed:1970 rpm; Bearing Type:Split Cylindrical Ex; Bearing - Housing - Seal:LSM115BXHGHTPS; Dimension X (Thread):M36; Dimension C:3.543 in; |
| 161.20.0710.890.11.1503 Standard 5 Slewing Ring Bearings | db - Cone Backface Backing Diameter:14.06 in; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):324; Cone Part Number:HM261049DW; R - Cone Frontface To Clear Radius2:0.130 in; Ab - Cage-Cone Frontface Clearance:0.25 in; C1 - Dynamic Radial Rating (1 million revolutions)1:360000 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:93200 lbf; K - Factor7:1.74; G1 - Heat Generation Factor (Roller-Raceway)8:3310; |
| 61.20.0414.500.01.1503 Standard 5 Slewing Ring Bearings | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:10900 lbf; db - Cone Backface Backing Diameter:2.6 in; Y1 - ISO Factor9:1.91; Y2 - ISO Factor10:2.84; Cone Part Number:387W; T - Bearing Width across Cones:1.9369 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:3810 lbf; Bearing Weight:3.65 lb; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:42200 lbf; Aa - Cage-Cone Backface Clearance:0.03 in; |
| 62.20.0414.500.01.1503 Standard 5 Slewing Ring Bearings | r - Cup Backface To Clear Radius2:2.03 mm; Cone Part Number:07100; Series:07000; e - ISO Factor8:0.4; C1 - Dynamic Radial Rating (1 million revolutions)5:6540 lbf; Cg - Geometry Factor:0.0509; D:51.999 mm; G2 - Heat Generation Factor (Rib-Roller End):7.1; Cup Part Number:07205; B - Cone Width:14.260 mm; Y - ISO Factor9:1.49; Bearing Weight:0.10 Kg; C - Cup Width:12.700 mm; G1 - Heat Generation Factor (Roller-Raceway):7.6; |
| 282.30.1175.013 Type 110/1300.2 Standard 5 Slewing Ring Bearings | Bolt Size:4 x M30; Dimension H1:2.1 in; Dimension H:9.016 in; Bearing Type:Split Cylindrical Ex; Bearing Number:HSM135BX; Pillow/Plummer Block Style:Split Cylindrical Ho; Shipping Weight:655 lb; Maximum Speed:1340 rpm; Dimension H2:19.1 in; Series Type:Heavy Series; Cr - Dynamic Load Rating:208623 lbf; Seal Type:Aluminium Triple Lab; Support Type:Four-Bolt Plummer Bl; Dimension J:20.2 in; Dimension K:4.0 in; |
| 162.25.1077.891.21.1503 Standard 5 Slewing Ring Bearings | Constant e:0.33; ra (max):2.5 mm; Configuration:Double Row; Fillet Radius/Chamfer:3 mm; B:60 mm; Da (max):166 mm; Groove Width A:11 mm; Radial Clearance:0.080 to 0.110 mm; Axial Load Factor Y2:3.00; Enclosure:Open; Weight:7.460 kg; D:180 mm; Axial Load Factor Y1:2.02; Retainer Material:Pressed Steel; Limiting Speed - Grease:2,600 rpm; Axial Load Factor Y0:1.97; d:85 mm; Dynamic Load Rating:665,000 N; |
| 231.21.0975.013 Type 21/1050.1 Standard 5 Slewing Ring Bearings | B - Double Cone Width:8.1250 in; T - Bearing Width across Cups:8.1250 in; D:16.1410 in; Aa - Cage-Cone Backface Clearance:0 in; Cage Type:Pin-Type; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:35600 lbf; Db - Cup Backface Backing Diameter:14.92 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:93800 lbf; Y2 - ISO Factor10:2.6; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:362000 lbf; |
| No. | Brand | J | a | e | N | C | c | B | H |
| 161.25.0886.890.11.1503 | Standard 5 | 350.00 mm | - | - | 18 mm | - | - | - | - |
| 161.16.0400.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R16-220E1 | Rotek | - | - | - | - | - | - | - | - |
| 231.20.1000.013 Type 21/1200.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.20.0400.013 Type 21/520.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.21.0975.013 Type 21/1050.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.22.0575.502.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.21.0975.013 Type 21/1050.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.21.1075.013 Type 21/1200.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.21.0775.013 Type 21/850.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.20.0400.503 Type 21/520.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.25.0764.106.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 230.21.0775.013 Type 21/850. | Standard 5 | - | - | - | - | - | - | - | - |
| 60.20.0414.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0944.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| A22-166N1 | Rotek | - | - | - | - | - | - | - | - |
| 61.20.0844.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.25.0955.575.11.1403 | Standard 5 | - | - | - | - | - | - | 296 mm | - |
| 280.30.0900.013 Type 110/1100. | Standard 5 | - | - | - | - | - | - | - | - |
| 161.25.1077.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 230.21.1075.013 Type 21/1200. | Standard 5 | - | - | - | - | - | - | - | - |
| 232.21.0875.013 Type 21/950.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.25.1077.304.21.1504 | Standard 5 | - | - | - | - | - | - | 7 mm | - |