| 3R16-220N1 Rotek Slewing Ring Bearings | ra (max):3 mm; Groove Width A:26 mm; Limiting Speed - Oil:1,000 rpm; Axial Load Factor Y2:3.11; Weight:104.000 kg; Da (max):462 mm; Configuration:Double Row; B:160 mm; Enclosure:Open; Retainer Material:Machined Brass; Roller Profile:Symmetric; Bore Type:Cylindrical Bore; D:480 mm; Nr. of Holes:6; Limiting Speed - Grease:790 rpm; Radial Clearance:0.310 to 0.410 mm; Axial Load Factor Y0:2.04; d:320 mm; |
| 282.30.0900.013 Type 110/1100.2 Standard 5 Slewing Ring Bearings | G1 - Heat Generation Factor (Roller-Raceway):18; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2080 lbf; Cup Part Number:14274; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; B - Cone Width:25.933 mm; B:26.195 mm; Cage Type:Stamped Steel; Bearing Weight:0.4 Kg; Aa - Cage-Cone Backface Clearance:6.9 mm; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):13.3; |
| 231.20.0900.013 Type 21/1050.1 Standard 5 Slewing Ring Bearings | e - ISO Factor3:0.49; G1 - Heat Generation Factor (Roller-Raceway):73.5; K - Factor2:1.2; Y - ISO Factor4:1.23; Da - Cup Frontface Backing Diameter:105.40 mm; Cg - Geometry Factor:0.115; r - Cup Backface To Clear Radius1:2.54 mm; Cup Part Number:JLM813010; D:110.000 mm; Design Units:METRIC; G2 - Heat Generation Factor (Rib-Roller End):26.3; Db - Cup Backface Backing Diameter:98.04 mm; C - Cup Width:20.500 mm; |
| 230.21.0975.013 Type 21/1050. Standard 5 Slewing Ring Bearings | Dimension SV:4.13 in; Eng Internal Radial Clearance - Max:0.0067; Shaft Tolerance:0.0030 in; Housing Style:Round Flange; Grease Lubrication - B/C/O Seal:600 rpm; C0 - Static Load:147000 lb; Shaft Size :3-15/16 in; Bearing Number:22222; Pre Install Clearance Min:0.135 mm; Y1 - Geometry Factor:2.73; Y2 - Geometry Factor:4.06; e - Geometry Factor:0.25; Pre Install Clearance Max:0.170 mm; Dimension L Exp:4.62 in; |
| 60.25.1055.575.11.1403 Standard 5 Slewing Ring Bearings | Dx (min):68.5 mm; Fillet Radius/Chamfer:1.1 mm; Da (max):55 mm; Limiting Speed - Oil:14,000 rpm; D1 (max):59.6 mm; Static Load Rating:12,100 N; D:62 mm; Factor fo:12.2; ra (max):1 mm; a (max):3.3 mm; Snap Ring Outside Diameter:67.7 mm; b (min):1.9 mm; Enclosure:Snap Ring Groove wit; Bore Type:Cylindrical Bore; Weight:0.232 kg; B:17 mm; Snap Ring Width:1.7 mm; da (min):32 mm; Dynamic Load Rating:23,600 N; |
| A12-125P1 Rotek Slewing Ring Bearings | t:12 mm; Appropriate Hydraulic Nut:HMV96; e:6.5 mm; d1:450.00 mm; G:Tr480x5; C1:95.00 mm; L1:335.00 mm; Locknut:HM3196; Lockwasher and Lockplates:MS3196; D3:620 mm; C:75 mm; Weight:135.00 Kg; Ro:M8; |
| 162.25.0980.890.11.1503 Standard 5 Slewing Ring Bearings | Factor fo:16.1; Weight:0.125 kg; Limiting Speed - Grease:9,500 rpm; D:72 mm; Radial Clearance:0.018 to 0.036 mm; d:50 mm; Da (max):68 mm; Static Load Rating:11,700 N; ra (max):0.6 mm; Dynamic Load Rating:14,500 N; B:12 mm; Bore Type:Cylindrical Bore; da (min):54 mm; Enclosure:Double Seal; Configuration:Single Row; |
| 231.20.0400.013 Type 21/520.1 Standard 5 Slewing Ring Bearings | Y1 - Geometry Factor:3.07; Dimension D Min:9.50 in; Bearing Number:22217; Grease Lubrication - B/C/O Seal:1100 rpm; Grease Lubrication - M/N Seal:1400 rpm; Dimension SVV:4.18 in; Weight:33 lb; Dimension L:3.59 in; Oil Lubrication - T Seal:2400 rpm; Dimension RVV:0.59 in; Pre Install Clearance Min:0.0037 in; Oil Lubrication - B/C/O Seal:1100 rpm; UPC Code:0883450146715; Engineering Group:Mounted Bearing; |
| 61.20.1094.500.01.1503 Standard 5 Slewing Ring Bearings | db - Cone Backface Backing Diameter:44.5 mm; WPD:58.9 mm; C0 - Static Radial Rating:55000 N; G1 - Heat Generation Factor (Roller-Raceway):18.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:9410 N; C90 - Dynamic Radial Rating (90 million revolutions)5:13200 N; G2 - Heat Generation Factor (Rib-Roller End):13.6; Cg - Geometry Factor:0.0692; R - Cone Backface To Clear Radius3:1.270 mm; da - Cone Frontface Backing Diameter:42.5 mm; |
| 60.20.0414.575.01.1403 Standard 5 Slewing Ring Bearings | B2:2.937 in; Taper:1:12; Series:230K; D1:5.693 in; Tolerance1:-0.005 in; Lockwasher and Lockplates:W-024; SNW/SNP Assembly Weight:6.16 lb; Diameter d :4 3/16 in; Locknut:N-024; Bearing Number:23024K; S:0.938 in; Sleeve:S-3024; |
| 62.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings | B - Cone Width:17.000 mm; K - Factor7:1.4; Aa - Cage-Cone Backface Clearance:0 mm; G2 - Heat Generation Factor (Rib-Roller End):13.6; db - Cone Backface Backing Diameter:44.45 mm; C0 - Static Radial Rating:55000 N; a - Effective Center Location3:-2.3 mm; G1 - Heat Generation Factor (Roller-Raceway):18.4; C1 - Dynamic Radial Rating (1 million revolutions)5:51000 N; d:38.000 mm; da - Cone Frontface Backing Diameter:42.42 mm; |
| 3R16-265E1 Rotek Slewing Ring Bearings | Design Units:Imperial; e - ISO Factor3:0.44; K - Factor2:1.32; C - Cup Width:1.2500 in; r - Cup Backface To Clear Radius1:0.130 in; Db - Cup Backface Backing Diameter:10.91 in; D:11.7500 in; Series:8900; Cup Part Number:8920; Y - ISO Factor4:1.35; |
| 61.20.0944.575.01.1403 Standard 5 Slewing Ring Bearings | C0r - Static Load Rating:0.52 kN; Grease Limiting Speed:46000 rpm; Outside Ring Width B:5.000 mm; Features:Non-Contact Seals; Oil Limiting Speed:54000 rpm; Outside Diameter D:15.000 mm; Cr - Dynamic Load Rating:1.3 kN; Weight:0.0040 Kg; Bore Size d:6 mm; Radius Rs min:0.200 mm; |
| 62.20.0710.000.11.1503 Standard 5 Slewing Ring Bearings | Oil Holes in Retainer:No; Weight:0.4 lb; Steering Pivot Rating:7100 lbf; Bearing Type:Thrust Tapered Rolle; B:0.4300 in; d - Bore Diameter:1.7568 in; R - Fillet Radius Shaft (Max):0.03 in; D - Bearing O.D.:3.0000 in; |
| 231.21.0875.013 Type 21/950.1 Standard 5 Slewing Ring Bearings | Clearance:C0 (Normal); Cr - Dynamic Load Rating:5.1 kN; Grease Reference Speed:23000 rpm; Bore Size d:12 mm; Weight:0.02 Kg; Radius Rs min:0.300 mm; C0r - Static Load Rating:2.4 kN; Outside Ring Width B:8.000 mm; Outside Diameter D:28.0000 mm; Oil Reference Speed:33000 rpm; Features:One Contact Seal; |
| 162.16.0630.891.21.1503 Standard 5 Slewing Ring Bearings | Axial Load Factor Y0:1.80; Roller Profile:Symmetric; Enclosure:Open; Limiting Speed - Oil:900 rpm; d:300 mm; Axial Load Factor Y2:2.73; Da (max):518 mm; B:192 mm; Bore Type:Cylindrical Bore; Configuration:Double Row; Limiting Speed - Grease:720 rpm; Groove Width A:32 mm; Radial Clearance:0.280 to 0.370 mm; Nr. of Holes:8; Axial Load Factor Y1:1.84; Fillet Radius/Chamfer:5 mm; D:540 mm; Static Load Rating:6,250,000 N; |
| No. | Brand | J | a | e | N | C | c | B | H |
| 230.20.1000.503 Type 21/1200. | Standard 5 | - | - | - | - | - | - | - | - |
| 162.25.1077.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 250.14.0300.013 Type 13/4 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.25.1077.891.21.1503 | Standard 5 | - | - | - | - | - | - | 15 mm | - |
| 282.30.1000.013 Type 110/1200.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 281.30.0975.013 Type 110/1100.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.20.0450.891.21.1503 | Standard 5 | - | - | - | - | - | - | 27.788 mm | - |
| 162.20.0450.890.11.1503 | Standard 5 | - | - | - | - | - | - | 24 mm | - |
| 231.20.0900.503 Type 21/1050.1 | Standard 5 | - | - | - | - | - | - | 52 mm | - |
| 91.20.1006.990.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 282.30.1100.013 Type 110/1300.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.35.0680.000.11.1503 | Standard 5 | - | - | - | - | 185.0 mm | - | - | - |
| 162.20.0630.891.21.1503 | Standard 5 | - | - | - | - | - | - | 45 mm | - |
| 162.25.0886.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| A22-166N1 | Rotek | - | - | - | - | - | - | - | - |
| 92.20.1006.991.21.1503 | Standard 5 | - | - | - | - | - | - | 5.0000 in | - |
| 232.21.0775.013 Type 21/850.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.20.0710.891.21.1503 | Standard 5 | - | - | 9.0 mm | - | - | - | - | - |
| 60.20.0414.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.30.1120.000.11.1504 | Standard 5 | - | - | - | 18 mm | - | - | - | 194 mm |
| 60.22.0660.001.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.21.0775.013 Type 21/850.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.20.0600.503 Type 21/750.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.25.0886.800.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0560.001.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.16.0560.890.11.1503 | Standard 5 | - | - | - | - | 4.750 in | - | 16.5 in | 9.5625 in |
| 232.20.0400.013 Type 21/520.2 | Standard 5 | - | - | - | - | - | - | - | - |
| S22-140E1 | Rotek | - | - | - | - | - | - | 10 mm | - |