62.25.1055.575.11.1403 Standard 5 Slewing Ring Bearings | r - Cup Frontface To Clear Radius2:0.06 in; Da - Cup Frontface Backing Diameter:4.56 in; Cg - Geometry Factor8:0.111; D:4.8750 in; Y1 - ISO Factor5:1.95; Y2 - ISO Factor6:2.9; e - ISO Factor4:0.35; Series:555; C - Double Cup Width:2.5 in; G2 - Heat Generation Factor (Rib-Roller End):21.1; G1 - Heat Generation Factor (Roller-Raceway)7:91; Design Units:Imperial; K - Factor3:1.69; Y - ISO Factor1:1.73; |
162.25.1077.891.21.1503 Standard 5 Slewing Ring Bearings | Constant e:0.33; ra (max):2.5 mm; Configuration:Double Row; Fillet Radius/Chamfer:3 mm; B:60 mm; Da (max):166 mm; Groove Width A:11 mm; Radial Clearance:0.080 to 0.110 mm; Axial Load Factor Y2:3.00; Enclosure:Open; Weight:7.460 kg; D:180 mm; Axial Load Factor Y1:2.02; Retainer Material:Pressed Steel; Limiting Speed - Grease:2,600 rpm; Axial Load Factor Y0:1.97; d:85 mm; Dynamic Load Rating:665,000 N; |
161.16.0450.890.11.1503 Standard 5 Slewing Ring Bearings | D:3.1496 in; Da - Cup Frontface Backing Diameter:2.91 in; Y - ISO Factor4:1.49; e - ISO Factor3:0.4; Cup Part Number:28315-B; r - Cup Backface To Clear Radius1:0.06 in; C1 - Cup Flange Width:0.1563 in; Cg - Geometry Factor5:0.0709; Series:28000; D1 - Flange Outer Diameter:3.3015 in; C - Cup Width:0.6250 in; K - Factor2:1.45; Design Units:Imperial; |
162.16.0630.891.21.1503 Standard 5 Slewing Ring Bearings | Axial Load Factor Y0:1.80; Roller Profile:Symmetric; Enclosure:Open; Limiting Speed - Oil:900 rpm; d:300 mm; Axial Load Factor Y2:2.73; Da (max):518 mm; B:192 mm; Bore Type:Cylindrical Bore; Configuration:Double Row; Limiting Speed - Grease:720 rpm; Groove Width A:32 mm; Radial Clearance:0.280 to 0.370 mm; Nr. of Holes:8; Axial Load Factor Y1:1.84; Fillet Radius/Chamfer:5 mm; D:540 mm; Static Load Rating:6,250,000 N; |
A12-125P1 Rotek Slewing Ring Bearings | t:12 mm; Appropriate Hydraulic Nut:HMV96; e:6.5 mm; d1:450.00 mm; G:Tr480x5; C1:95.00 mm; L1:335.00 mm; Locknut:HM3196; Lockwasher and Lockplates:MS3196; D3:620 mm; C:75 mm; Weight:135.00 Kg; Ro:M8; |
61.20.0744.500.01.1503 Standard 5 Slewing Ring Bearings | d:20 mm; Snap Ring Outside Diameter:46.3 mm; ra (max):0.6 mm; Dx (min):47 mm; Cy (max):2.9 mm; Limiting Speed - Oil:21,000 rpm; Dynamic Load Rating:9,400 N; Fillet Radius/Chamfer:0.6 mm; D1 (max):39.8 mm; a (max):2.1 mm; Factor fo:13.9; Da (max):38 mm; r1:0.5 mm; b (min):1.4 mm; D:42 mm; Static Load Rating:5,000 N; Bore Type:Cylindrical Bore; Weight:0.069 kg; Limiting Speed - Grease:18,000 rpm; Snap Ring Width:1.1 mm; |
60.25.0955.575.11.1403 Standard 5 Slewing Ring Bearings | Radius Rs min:1.100 mm; Outside Diameter D:100.000 mm; Bore Size d:65 mm; C0r - Static Load Rating:23.5 kN; Cr - Dynamic Load Rating:30.5 kN; Features:Open; Grease Reference Speed:6700 rpm; Oil Reference Speed:9700 rpm; Weight:0.43 Kg; Clearance:C3; Outside Ring Width B:18.000 mm; |
60.45.0805.001.11.1504 Standard 5 Slewing Ring Bearings | C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:38000 lbf; Series:355; K - Factor8:1.91; d:1.7500 in; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.09 in; R - Cone Backface To Clear Radius3:0.14 in; G1 - Heat Generation Factor (Roller-Raceway):30; C1 - Dynamic Radial Rating (1 million revolutions)6:21800 lbf; Cg - Geometry Factor:0.0732; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9840 lbf; |
230.21.0475.013 Type 21/520. Standard 5 Slewing Ring Bearings | Thread D12:Tr460x5; L:145.00 mm; b:25 mm; Taper:1:12; L11:153.00 mm; d1:420.00 mm; Appropriate Withdrawal Nut No.:HML92; Appropriate Hydraulic Nut:HMV92; Weight:21.50 Kg; |
230.21.0775.013 Type 21/850. Standard 5 Slewing Ring Bearings | Bearing Type:Split Cylindrical Ex; Support Type:Hanger Block; Dimension L:5.1 in; Cr - Dynamic Load Rating:31024 lbf; Dimension G:6.2 in; Series Type:Light Series; Dimension H:3.6 in; Dimension X (Thread):1 - 8 UNC; Bearing UPC:013992026071; Seal Type1:High Temperature Pac; Dimension C:2.559 in; Dimension Y:2.0 in; Note:This product line wa; Bearing Number:LSE215BX; Maximum Speed:3310 rpm; Shaft Size:2-15/16 in; |
61.25.0955.575.11.1403 Standard 5 Slewing Ring Bearings | Retainer Material:Machined Brass; Center Guidance:Fixed Inner Ring Rib; Radial Clearance:0.490 to 0.630 mm; B:296 mm; Nr. of Holes:8; Dynamic Load Rating:10,600,000 N; Static Load Rating:14,500,000 N; d:460 mm; Bore Type:Tapered Bore; Configuration:Double Row; Limiting Speed - Grease:450 rpm; da (min):496 mm; Axial Load Factor Y0:1.81; Hole Diameter (do):20 mm; Weight:709.000 kg; D:830 mm; Axial Load Factor Y2:2.75; |
61.25.0855.575.11.1403 Standard 5 Slewing Ring Bearings | Dimension H:150 mm; Cr - Dynamic Load Rating:71040 lbf; Housing Width:5.5 in; Seal Type:Viton Single Lip; Support Type:Two-Bolt Plummer Blo; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension L:445 mm; Bearing UPC:013992028044; Maximum Speed:1970 rpm; Ca - Axial Load Rating:4181.39 lbf; Bolt Size:2 x M24; Note:This product line wa; Dimension H2:310 mm; Cor - Static Load Rating:95993 lbf; Dimension J:380 mm; |
S16-112E1 Rotek Slewing Ring Bearings | Grease Lubrication - T Seal:1000 rpm; Float:0.083 in; Shaft Tolerance:0.0050 in; e - Geometry Factor:0.26; Dimension J (Bolt Size):1.125 in; Oil Lubrication - M/N Seal:700 rpm; Dimension L Exp:3.56 in; Dimension H:1.50 in; Dimension S:3.37 in; Grease Lubrication - M/N Seal:700 rpm; Locking Style:Eccentric; Dimension D:5.75 in; Bearing Number:22226; C0 - Static Load:212000 lb; Eng Internal Radial Clearance - Max:0.0057; |
92.20.1146.990.11.1503 Standard 5 Slewing Ring Bearings | C - Cup Width:47.625 mm; a - Effective Center Location3:-11.7 mm; D:288.925 mm; db - Cone Backface Backing Diameter:195.07 mm; Db - Cup Backface Backing Diameter:265.94 mm; da - Cone Frontface Backing Diameter:186.94 mm; Da - Cup Frontface Backing Diameter:271.30 mm; Cage Type:Stamped Steel; d:165.1 mm; Y - ISO Factor9:1.88; Design Units:Imperial; B:63.505 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:219000 lbf; |
282.30.1100.013 Type 110/1300.2 Standard 5 Slewing Ring Bearings | d:8 in; Ab - Cage-Cone Frontface Clearance:0.17 in; da - Cone Frontface Backing Diameter:8.82 in; C - Cup Width:1.3750 in; Cg - Geometry Factor11:0.117; Y1 - ISO Factor9:2.15; Aa - Cage-Cone Backface Clearance:0 in; Design Units:Imperial; K - Factor7:1.86; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:207000 lbf; B - Double Cone Width:3.7500 in; Cage Type:Stamped Steel; Cone Part Number:EE132081D; |
230.20.0400.013 Type 21/520. Standard 5 Slewing Ring Bearings | Dimension SVV:4.08 in; Oil Lubrication - T Seal:2650 rpm; Dimension RVV:0.76 in; Y2 - Geometry Factor:4.67; Grease Lubrication - M/N Seal:1500 rpm; Y1 - Geometry Factor:3.14; Dimension F:8.75 in; Bearing Number:22216; Shaft Size Type:Imperial; Dimension L:3.33 in; Dimension J (Bolt Size):0.625 in; Float:0.083 in; Full Timken Part Number:QVVC16V215SB; Locking Style:Double V-Lock; Oil Lubrication - B/C/O Seal:1200 rpm; |
No. | Brand | J | a | e | N | C | c | B | H |
162.20.0630.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
60.20.0944.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
231.20.0400.503 Type 21/520.1 | Standard 5 | - | - | - | - | - | - | - | - |
62.20.0744.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
230.21.1075.013 Type 21/1200. | Standard 5 | - | - | - | - | - | - | - | - |
282.30.1175.013 Type 110/1300.2 | Standard 5 | - | - | - | - | - | - | - | - |
232.20.1000.503 Type 21/1200.2 | Standard 5 | - | - | - | - | - | - | - | - |
62.25.0886.109.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
62.25.1077.890.11.1503 | Standard 5 | - | - | - | - | - | - | 51 mm | - |
61.20.0560.101.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
61.25.1120.000.11.1504 | Standard 5 | - | - | - | - | - | - | 7 mm | - |
60.25.0855.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
162.20.0710.891.21.1503 | Standard 5 | - | - | 9.0 mm | - | - | - | - | - |
12.18.0748.002.21.1504 | Standard 5 | - | 4.00 mm | - | - | - | - | - | - |
A22-166N1 | Rotek | - | - | - | - | - | - | - | - |
161.25.0980.890.11.1503 | Standard 5 | - | - | - | - | - | - | 17.5 mm | - |
161.16.0400.891.21.1503 | Standard 5 | - | - | - | - | 79 mm | 3 mm | 80 mm | - |
231.20.0500.503 Type 21/650.1 | Standard 5 | - | - | - | - | - | - | - | - |
162.20.0560.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
230.21.0575.013 Type 21/650. | Standard 5 | - | - | - | - | - | - | - | - |
231.21.0775.013 Type 21/850.1 | Standard 5 | - | - | - | - | - | - | - | - |
61.20.0544.575.01.1403 Standard 5 Slewing Ring Bearings Video