| 162.20.0710.890.11.1503 Standard 5 Slewing Ring Bearings | Static Load Rating Co:8180 kN; Thermal Speed Ratings - Grease:320 rpm; Weight:456.000 lb; O.D. D:710.000 mm; Chamfer rsmin:5.00 mm; DUR/DOR F/E:588.000 mm; Bore d:530.000 mm; Geometry Factor Cg2:0.3340; Backing Shaft Diameter ds:577.7 mm; Width B:180.000 mm; Thermal Speed Ratings - Oil:350 rpm; Chamfer r1smin3:5.0 mm; Lubrication Groove g:19.3 mm; Dynamic Load Rating C11:3360 kN; Dimension S4:6.30 mm; |
| 162.25.1077.891.21.1503 Standard 5 Slewing Ring Bearings | Constant e:0.33; ra (max):2.5 mm; Configuration:Double Row; Fillet Radius/Chamfer:3 mm; B:60 mm; Da (max):166 mm; Groove Width A:11 mm; Radial Clearance:0.080 to 0.110 mm; Axial Load Factor Y2:3.00; Enclosure:Open; Weight:7.460 kg; D:180 mm; Axial Load Factor Y1:2.02; Retainer Material:Pressed Steel; Limiting Speed - Grease:2,600 rpm; Axial Load Factor Y0:1.97; d:85 mm; Dynamic Load Rating:665,000 N; |
| 232.20.0800.503 Type 21/950.2 Standard 5 Slewing Ring Bearings | e - Geometry Factor:0.24; Locking Style:Single V-Lock; Dimension D Min:10.88 in; Shaft Size :90 mm; Engineering Group:Mounted Bearing; Dimension J (Bolt Size):0.875 in; Grease Lubrication - M/N Seal:1200 rpm; Oil Lubrication - M/N Seal:1200 rpm; Dimension A:4.50 in; Dimension G:3.420 in; Pre Install Clearance Max:0.0055 in; Eng Internal Radial Clearance - Max:0.0055; Bearing Number:22220; |
| 62.25.0886.801.21.1504 Standard 5 Slewing Ring Bearings | C0 - Static Radial Rating:156000 lbf; D:7.5 in; Cg - Geometry Factor11:0.107; G1 - Heat Generation Factor (Roller-Raceway)10:266; C1 - Dynamic Radial Rating (1 million revolutions)5:120000 lbf; e - ISO Factor8:0.33; C90 - Dynamic Radial Rating (90 million revolutions)4:31100 lbf; d:3.8750 in; Ab - Cage-Cone Frontface Clearance:0.16 in; C - Cup Width:1.8125 in; K - Factor7:1.74; a - Effective Center Location3:-0.59 in; |
| 162.16.0450.890.11.1503 Standard 5 Slewing Ring Bearings | Oil Lubrication - M/N Seal:1600 rpm; Bearing Number:22215; Dimension N:2.550 in; Dimension C:3.7 in; UPC Code:0883450043229; Dimension A:10.04 in; Shaft Size :2-1/2 in; Eng Internal Radial Clearance - Min:0.0030; Oil Lubrication - T Seal:2900 rpm; Grease Lubrication - B/C/O Seal:1300 rpm; Dimension F:7.56 in; Full Timken Part Number:QVFB15V208SB; C0 - Static Load:54100 lb; Grease Lubrication - T Seal:2400 rpm; |
| 61.20.0414.575.01.1403 Standard 5 Slewing Ring Bearings | Aa - Cage-Cone Backface Clearance:4.1 mm; a - Effective Center Location3:-18.8 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:22100 lbf; B - Cone Width:66.675 mm; B:64.795 mm; Design Units:Imperial; r - Cup Backface To Clear Radius2:3.30 mm; Bearing Weight:10 Kg; C90 - Dynamic Radial Rating (90 million revolutions)4:39600 lbf; Cg - Geometry Factor:0.118; Da - Cup Frontface Backing Diameter:201.68 mm; |
| 231.20.0900.013 Type 21/1050.1 Standard 5 Slewing Ring Bearings | e - ISO Factor3:0.49; G1 - Heat Generation Factor (Roller-Raceway):73.5; K - Factor2:1.2; Y - ISO Factor4:1.23; Da - Cup Frontface Backing Diameter:105.40 mm; Cg - Geometry Factor:0.115; r - Cup Backface To Clear Radius1:2.54 mm; Cup Part Number:JLM813010; D:110.000 mm; Design Units:METRIC; G2 - Heat Generation Factor (Rib-Roller End):26.3; Db - Cup Backface Backing Diameter:98.04 mm; C - Cup Width:20.500 mm; |
| 61.20.0744.500.01.1503 Standard 5 Slewing Ring Bearings | d:20 mm; Snap Ring Outside Diameter:46.3 mm; ra (max):0.6 mm; Dx (min):47 mm; Cy (max):2.9 mm; Limiting Speed - Oil:21,000 rpm; Dynamic Load Rating:9,400 N; Fillet Radius/Chamfer:0.6 mm; D1 (max):39.8 mm; a (max):2.1 mm; Factor fo:13.9; Da (max):38 mm; r1:0.5 mm; b (min):1.4 mm; D:42 mm; Static Load Rating:5,000 N; Bore Type:Cylindrical Bore; Weight:0.069 kg; Limiting Speed - Grease:18,000 rpm; Snap Ring Width:1.1 mm; |
| 231.20.0500.503 Type 21/650.1 Standard 5 Slewing Ring Bearings | Dimension SVV:4.18 in; Dimension RVV:0.60 in; Grease Lubrication - T Seal:2200 rpm; Dimension E:1.88 in; Dimension B:6.59 in; Dimension A:3.25 in; Oil Lubrication - T Seal:2650 rpm; Bearing Number:22216; Grease Lubrication - B/C/O Seal:1150 rpm; Dimension D Max:9.10 in; Engineering Group:Mounted Bearing; Dimension J (Bolt Size):0.625 in; Dimension C:4.19 in; Grease Lubrication - M/N Seal:1500 rpm; |
| 232.21.0475.013 Type 21/520.2 Standard 5 Slewing Ring Bearings | Housing Width A:17.5 in; Total Height H:104.8 mm; Socket Width A2:44.4 mm; Center of Bearing from End S:9.5 mm; Opening Width N1:15.9 mm; Seal Type:Molded Shroud; Housing Style:Take-Up; Slot Width A1:17.5 mm; Dynamic Load Rating:6400 lbf; Static Load Rating:3440 lbf; Series:Standard; Height H2:63.5 mm; Dimension L2:12.70 mm; Opening Height N2:36.5 mm; Shaft Length L1:74.6 mm; Inside Ring Width B:25.4 mm; |
| 230.20.0900.503 Type 21/1050. Standard 5 Slewing Ring Bearings | Limiting Speed (Grease):16400 rpm; Cage Type:CR - Phenolic Outer; Bearing Width:16 mm; Limiting Speed (Oil):32800 rpm; r - Outer Ring To Clear Radius3:1.0 mm; Contact Angle:15 ยบ; Da - Outer Ring Backing Diameter:94.300 mm; C0 - Static Radial Rating:14770 N; Ball Type:STEEL; Precision Class:ISO P4S (ABEC 7/9); Bearing Weight:0.340 Kg; do - Ball Diameter:8.73125 mm; Ce - Dynamic Radial Rating1:21300 N; |
| 92.20.1006.990.11.1503 Standard 5 Slewing Ring Bearings | Housing Style:Four-Bolt Square Fla; Bolt Size:M10; Center of Bearing from Housing End A2:10.3 mm; Dimension E:1.126 in; Housing Width A:0.748 in; Inside Ring Outside Diameter:1.142 in; Bolt Hole Size N:10 mm; Total Length L:85.7 mm; Inside Ring Width B:=Bearings1_Inside Ri; Shaft Size d:3/4 in; Center of Bearing from Bearing End S:8.7 mm; Bearing Number:GYA012RRB; Total Height:85.7 mm; Dynamic Load Rating:3190 lbf; |
| 3R13-128N1A Rotek Slewing Ring Bearings | Support Type:Eight-Bolt Plummer B; Dimension M:13.0 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension H2:31.1 in; Bearing - Housing - Seal:MSE1200BXHRSS; Bearing Type:Split Cylindrical Ex; Maximum Speed:610 rpm; Seal Type:Viton Single Lip; Bearing Number:MSE1200BX; Dimension L:37.7 in; Dimension H1:2.4 in; Bearing - Housing - Seal UPC:013992071651; Dimension H:15.512 in; Weight:1383 lb; |
| 162.16.0560.890.11.1503 Standard 5 Slewing Ring Bearings | Radial Clearance:0.040 to 0.075 mm; db (min):82 mm; Fillet Radius/Chamfer:2.1 mm; Limiting Speed - Oil:4,500 rpm; Configuration:Single Row; dc (min):92 mm; Da (max):138 mm; d:70 mm; Limiting Speed - Grease:3,600 rpm; Enclosure:Open; ra (max):2 mm; Static Load Rating:325,000 N; D:150 mm; Inside Ring Outside Diameter:89 mm; Bore Type:Cylindrical Bore; r1:2.1 mm; db (max):87 mm; dd (min):100 mm; Dynamic Load Rating:274,000 N; |
| 92.25.1154.991.21.1503 Standard 5 Slewing Ring Bearings | Grease Limiting Speed:22000 rpm; Features:Open; Oil Limiting Speed:26000 rpm; Radius Rs min:0.300 mm; Clearance:C3; Weight:0.016 Kg; Bore Size d:17 mm; Cr - Dynamic Load Rating:4.6 kN; C0r - Static Load Rating:2.6 kN; Outside Diameter D:30.000 mm; Outside Ring Width B:7.000 mm; |
| 62.25.1180.000.11.1504 Standard 5 Slewing Ring Bearings | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:33200 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:73600 lbf; C0 - Static Radial Rating:99200 lbf; Design Units:Imperial; K - Factor8:1.71; a - Effective Center Location4:-0.47 in; B - Cone Width:1.9000 in; Cg - Geometry Factor:0.0945; G2 - Heat Generation Factor (Rib-Roller End):29.4; Series:755; Cage Type:Stamped Steel; |
| No. | Brand | J | a | e | N | C | c | B | H |
| 280.30.0900.013 Type 110/1100. | Standard 5 | - | - | - | - | - | - | - | - |
| 232.21.0575.013 Type 21/650.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.20.0630.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0450.001.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 230.20.0800.013 Type 21/950. | Standard 5 | - | - | - | - | - | - | - | - |
| 232.20.1000.013 Type 21/1200.2 | Standard 5 | - | - | - | - | - | - | 21.430 mm | - |
| 60.20.0544.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0644.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.20.0414.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.20.0895.001.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.20.0600.013 Type 21/750.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.25.0855.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| S16-112E1 | Rotek | - | - | - | - | - | - | - | - |
| 231.21.0475.013 Type 21/520.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.20.0700.503 Type 21/850.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.20.0560.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.20.1094.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| A16-152E2 | Rotek | - | - | - | - | - | - | - | - |
| 280.30.1000.013 Type 110/1200. | Standard 5 | - | - | - | - | - | - | - | - |
| 3R16-197N1 | Rotek | - | - | - | - | - | - | - | - |
| 231.20.0400.503 Type 21/520.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.20.1146.991.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.21.1075.013 Type 21/1200.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.20.0895.000.11.1504 | Standard 5 | - | - | - | - | - | - | 38 mm | - |
| 62.25.0886.109.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.20.0710.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.20.0500.503 Type 21/650.1 | Standard 5 | - | - | - | - | - | - | - | - |
| A10-110P2D | Rotek | - | - | - | - | - | - | - | - |
| 62.25.0886.801.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |